Supports Contents

• SVALT Side Supports for the Mx Modular Heatsink Cooling System.
  
  
• Fasteners for attaching supports to heatsink. Different support types and materials use different fasteners. See product page for details. We will review customer’s order history to determine if existing heatsink is anodized heatsinks to receive black fasteners or raw aluminum heatsinks to receive stainless steel fasteners.
  
  
• Leveling feet are included with supports that use built in leveling feet (aluminum 1st gen dock, high stand, low stand supports, and wood 2nd gen low stand supports) or use leveling pads (wood 1st gen dock, high stand, low stand supports, and wood 2nd gen dock supports).
  
  
• Cable management systems included when applicable. Different support types and materials use different cable management system hardware. See product page for details.
  
  

• 2 x flat cardboard packaging insert bolted onto pair of side supports. Note orders with multiple side supports include additional layers of cardboard inserts.
  
  
• 4 x side supports packaging fasteners. Note orders with multiple side supports use longer fasteners.
  
  
• 4 x side supports packaging nuts.
  
  
• 8 x side supports packaging oversized washers.
  
  
• 1 or more x layers of hex cardboard for top/bottom layer cushioning and void fill.
  
  
• 1 x cardboard box that serves as both the shipping and product box.
  
  
• Or other packaging system.
  
  

• Assembly: Some assembly may be required. Follow packaging labels and see Product Setup page for product setup, operation and additional user guide resources.
  
  

Heatsink Contents

• 1 x SVALT Thermally Conductive Heatsink for the Mx Modular Heatsink Cooling System. Available in raw aluminum or with a black anodize finish. Four side support mounting pads installed on heatsink.
  
  
• 1 x 1/8-inch hex wrench/key for attaching side supports to heatsink, and right-to-repair disassembly.
  
  
• 1 x Cloth for cleaning heatsink and laptop coupling surfaces.
  
  

• 2 x folded cardboard packaging insert bolted onto each side of heatsink.
  
  
• 8 x heatsink packaging fasteners.
  
  
• 8 x heatsink packaging oversized washers.
  
  
• 1 or more x accessories boxes for heatsink, supports, and fan cooling system accessories.
  
  
• 1 or more x layers of hex cardboard for top/bottom layer cushioning and void fill.
  
  
• 1 x cardboard box that serves as both the shipping and product box.
  
  

• Assembly: Some assembly may be required. Follow packaging labels and see Product Setup page for product setup, operation and additional user guide resources.
  
  

140mm Fan Contents

• 1 x 140x140x25mm case fan per customer's selected order configuration.
  
  
• 1 x 140mm black metal fan grill / guards. Installed onto fan.
  
  
• 4 x #8-32 1 1/4-inch long black fasteners. Installed onto fan.
  
  
• 1 x 5/64-inch hex wrench/key for attaching fan to heatsink, and right-to-repair disassembly.
  
  
• 1 x Power adapter with 3/4-pin fan connecter at one end and 2.1m barrel power supply connecter at the other end.
  
  
• 1 x Power supply w/ fixed plug for domestic or multi-plug for international orders.
  
  

• 1 x Noctua NA-FC1 PWM dial-variable speed-controller.
  
  
• 2 x Noctua fan extension cable.
  
  
• 1 x Noctua fan 3-way splitter cable for dual 140mm and 80mm adjustable-speed configurations.
  
  
• 1 x Noctua fan power supply adapter for optional customer DIY setups.
  
  

• Assembly: Some assembly may be required. Follow packaging labels and see Product Setup page for product setup, operation and additional user guide resources.
  
  

Replacement Leveling Pads or Feet Contents

• Replacement leveling pads (wood supports): 4 x 1/32” thick and 4 x 1/16” thick pads to help level wood supports on uneven surfaces. These are also the pads that are used elsewhere on the supports, and so can be used to replace those.
  
  
• Replacement leveling feet short (wood low stand 2nd gen supports): 4 x threaded #8-32 short feet with round pads and nuts for leveling heatsink and adjustable laptop angle. These can be combined with the tall feet at the back for a steeper inclined laptop position.
  
  
• Replacement leveling feet tall (wood low stand 2nd gen supports): 4 x threaded #8-32 tall feet with round pads and special finger tightening nuts for leveling heatsink and adjustable laptop angle. These can be combined with the short feet at the front for a steeper inclined laptop position.
  
  
• Replacement leveling feet (alum supports): 2 x SVALT #10-32 feet with pads for leveling product. Available with space black, space gray and silver anodized aluminum finish.
  
  

• Replacement: Mx products and Mx support components include leveling pads and/or feet per the product page features and specs. These items are offered here as a replacement or as an extra set.
  
  
• Assembly: Some assembly may be required. Follow packaging labels and see Product Setup page for product setup, operation and additional user guide resources.
  
  

Replacement Cable Straps Contents

• 3 x 3-inch long and 1/2-inch wide hook and loop strips with hole in center for cable management assembly (1-2 needed for installation plus 1 extra).
  
  

• Replacement: Mx products and Mx support components include cable straps and hardware per the product page features and specs. These items are offered here as a replacement or as an extra set.
  
  
• Assembly: Some assembly may be required. Follow packaging labels and see Product Setup page for product setup, operation and additional user guide resources.