SRxM SPECIFICATIONS


Cooling System Specifications
  • G09 Fan: Noctua NF-P12 redux-900 120x120x25mm 12-volt case fan with 9 gray blades and a long life ball bearing. The low-speed cooling mode (lower LED) runs at approximately 700 RPM and produces up to 24 CFM airflow and approximately 10 dB(A) noise level. The high-speed cooling mode (upper LED) runs at approximately 900 RPM and produces up to 37 CFM airflow and approximately 13 dB(A) noise level.
  • G17 Fan: Noctua NF-P12 redux-1700 PMW 120x120x25mm 12-volt case fan with 9 gray blades and a long life ball bearing. The low-speed cooling mode (lower LED) runs at approximately 1200 RPM and produces up to 77 CFM airflow and approximately 16 dB(A) noise level. The high-speed cooling mode (upper LED) runs at approximately 1700 RPM and produces up to 97 CFM airflow and approximately 26 dB(A) noise level.
  • Modular Cooling System: Bolted connection for easy upgrade, exchange, servicing or cleaning. Cooling systems are available to purchase separately.
  • Modular Fan: Standard 2/3/4-pin fan connector for easy upgrade, exchange, servicing or cleaning with virtually any 120x120x25mm fan. User/customer supplied replacement fans must meet the following specifications: 1) 120x120x25mm +/-1mm in thickness, 2) 2-pin, 3-pin or 4-pin compact fan connector, 3) 12V, 4) 0.42A max, and 5) low-speed resistor 68 Ohms 3 Watt resistor compatibility.
  • Replacement Fans: G17 and B14 fans are available through accessories.
  • Dust Filter: Users can choose to install the dust filter to help reduce dust accumulation for users that choose to remove the Mac Mini’s bottom cover for direct internal component cooling. Use of a dust filter slightly decreases airflow and increases noise.
  • Setup: See Product Setup page for product setup, operation and additional user guide resources.
  • Right-to-Repair: See Right-to-Repair page for product assembly/disassembly and component installation/removal.


Power Supply Specifications
  • A North American power supply is included with USA, Canada, Mexico or Japan, while an international power supply is included with other locations.
  • North America Power Supply Specs: 100-240V AC input and 12V output power supply with a fixed Type A (USA, Canada, Mexico, Japan) plug.
  • International Power Supply Specs: 100-240V AC input and 12V output power supply with Type A (USA, Canada, Mexico, Japan), Type C (Europe, South America, Asia), Type G (United Kingdom, Ireland), and Type I (Australia, New Zealand, China) interchangeable plugs.
  • Replacement: SVALT products may only be used with the certified and marked LPS (Limited Power Supply) power supply. A replacement power supply is available through accessory.


Device Compatibility Specifications
  • Works with Mac Studio and all current and previous Mac Mini computers as listed below. For Mac Minis that have a removable bottom cover, the support pads have been design to work with the cover on or off. When the cover is off, the padding locks the Mac Mini in place so that cooling air is driven directly onto the internal components for immediate system wide cooling. Note that operating the Mac Mini with the bottom cover removed may not be considered normal operating conditions for the Mac Mini by Apple, and could impact warranty. A user installed dust filter accessory is included to help reduce internal dust accumulation, however, the user needs to first install the filter, and then to clean accumulated dust from the filter and computer as required. Dust filters reduce airflow and increase noise levels for a given airflow.
  • 2005 - 2009 Mac Mini: 1st and 2nd generation include a taller silver aluminum and white plastic enclosure that uses cool air intake vents along the front and side bottom edges.
  • 2010 - 2017 Mac Mini: 3rd generation includes a thinner silver aluminum enclosure that uses a cool air intake vent along the front edge of a removable round bottom cover that once removed exposes components for increased cooling performance.
  • 2018 - 2019 Mac Mini: 4th generation includes the thinner space gray aluminum enclosure that uses cool air intake vents around the edge of a removable round bottom cover that once removed exposes a perforated metal screen covering for increased cooling performance. An iFixit pry bar is included to assist users who choose to remove the bottom panel.
  • 2020 - 2021 Mac Mini: 5th generation includes Apple Silicon and that uses cool air intake vents around the edge of a removable round bottom cover that once removed exposes a perforated metal screen covering for increased cooling performance. An iFixit pry bar is included to assist users who choose to remove the bottom panel.
  • Note User Accessories: The Cooling Stand’s solid front panel blocks cooling fan airflow and noise, as well as hides cord clutter and user accessories. When placing user accessory items that generate heat, then some portion of that heat will transfer to the Mac Mini / Studio through line-of-site proximity heat radiation, rising hot air currents, and/or fan driven air movement. To lessen heat transfer, or when maximum cooling is desired, then avoid placing items that generate heat close. When placing items under the cooling fan, then note the maximum available open space under the fan is 2.125 inches in height. Placing large and/or tall items directly under the fan will reduce fan efficiency, lower airflow and/or increased noise. To lessen these effects, do not place tall user accessories directly under the fan intake, and for maximum cooling efficiency, do not place anything under or around the fan.


Dimensional Specifications
  • Product Side to Side: 9.5 inches.
  • Product Front to Back: 8.6 inches.
  • Product Top to Bottom: 4.3 inches.
  • Product Weight: 3.1 lbs.
  • Shipping Weight: 5.6 lbs.


Content Specifications
  • Contents
    • 1 x Support Mounting Plate: anodized aluminum modular system component onto which other components mount, ships uninstalled in foam pocket.
    • 1 x Support Plate #10 hex key: tool for installing modular system components, ships uninstalled in accessories box.
    • 2 x Support Legs: steel support leg modular system component, ships uninstalled in foam pocket.
    • 4 x Support Leg #10 mounting fasteners: fasteners to mount Support Legs onto Support Plate, ships uninstalled in accessories box.
    • 2 x Support Leg leveling pads: optional user installed non-slip 1/32” thick pads to level leg contact pad locations, ships uninstalled in accessories box.
    • 1 x Cooling Unit: active airflow cooling modular system component, ships uninstalled in foam pocket.
    • 1 x Cooling Unit power supply: see power supply notes below, ships uninstalled in accessories box.
    • 2 x Cooling Unit #10 mounting fasteners: fasteners to mount Cooling Unit to Support Plate, ships uninstalled in accessories box.
    • 1 x Cooling Unit #8 hex key: tool for servicing and accessing Cooling Unit internal components, ships uninstalled in accessories box.
    • 2 x Cooling Unit Mac Mini / Studio supports: Mac Mini / Studio modular system component, ships installed.
    • 4 x Cooling Unit Mac Studio retention pads: Optional user installed add-on pads can be installed to lock a Mac Studio in place, ships uninstalled in accessories box.
    • 4 x Cooling Unit Mac Mini retention pads: Optional user installed add-on pads can be installed to lock a Mac Mini in place with the bottom cover removed, ships uninstalled in accessories box.
    • 1 x Cooling Unit Mac Mini / Studio dust filter: Mac Mini / Studio modular system component, ships uninstalled in accessories box.
    • 1 x Cooling Unit Mac Mini / Studio dust filter frame: Mac Mini / Studio modular system component, ships installed.
    • 4 x Cooling Unit Mac Mini / Studio #8 thumb nuts: Mac Mini / Studio modular system component, ships installed.
    • 4 x Cooling Unit #8 long fan fasteners: Mac Mini / Studio modular system component, ships installed.
    • 1 x iFixit Mac Mini bottom case opener: tool for users who wish to remover bottom cover on 2018+ Mac Minis, ships uninstalled in accessories box.
    • 1 x Reusable accessory box: holds accessories.
    • 1 x Reusable product packaging: modular product box works with all Cooling Stand SR series models and can be used as a compact travel case.
  • Additional/Replacement Contents for Optional Mac Mini/Studio Supports
    • 2 x Laptop Support Arms: steel 3rd generation laptop support arms, ships uninstalled in foam pocket.
    • 4 x Laptop Support Arm cable straps: user installed Velcro straps, ships uninstalled in accessories box.
    • 4 x Laptop Support Arm #10 mounting fasteners: fasteners to mount Support Arms onto Support Plate, ships uninstalled in accessories box.
    • 4 x Support Arm leveling pads: optional user installed non-slip 1/32” thick pads to level arm contact pad locations, ships uninstalled in accessories box.
  • Note: Assembly required. Follow packaging labels and see Product Setup page for product setup, operation and additional user guide resources.


SVALT anodized aluminum colors Aluminum Finish Color Specifications
listed from left to right
  • Silver bead blasted matte anodize aluminum finish is similar to Apple Silver.
  • Gray bead blasted matte anodize aluminum finish is similar to Apple Space Gray.
  • Dark Gray bead blasted matte anodize aluminum finish is similar to Apple Space Black.
  • Black bead blasted matte anodize aluminum finish is a full and deep black.
  • Notes
    • Anodized parts are pre-finished by hand and then anodized by hand in small batches. The anodize color may vary slightly between parts.
    • Anodized part’s bottom and/or back surfaces are considered non-cosmetic finish.
    • Satin silver and glossy black anodized finishes are brighter than matte anodize.
    • Cooling Stand arm, leg and cooler cover parts are made from steel and have a matte black powder coat finish. The parts have non-cosmetic conditions around the through holes used for mounting holes.


SVALT fans and colors G07, G12, G09, G17 Fan Model Color Specifications
listed from left to right
  • G07 and G12 120x120x25mm Noctua fan with light gray frame and dark gray blades.
  • G09 and G17 120x120x25mm Noctua fan with light gray frame and dark gray blades.


Additional Laptop Arm Support Specifications
  • See SRx product page for associated specifications with Laptop Arm Supports and accessories.