SRx FEATURES


SVALT Cooling Stand model SRx with noted features diagram Features Overview
  • Rectilinear styling with straight sides.
  • Active and passive airflow cooling.
  • Externally cools laptop enclosure.
  • Pushbutton dual-speed for quiet and max cooling.
  • Quiet and powerful active airflow cooling system.
  • Exchangeable snap-in 3/4-pin 120x120x25mm fan.
  • Exchangeable bolt-in modular cooling system.
  • User reconfigurable bolt-in modular components.
  • 3rd generation laptop support arms w/ 200% more open airflow.
  • 3rd gen arms with two position non-slip pads better support ultra-compact to ultra-large gaming laptops.
  • Universal compatibility for Mac / PC laptops.
  • Screen viewing ergonomics raised 8.3-inches higher.
  • Extra heavy duty structure for no bounce support.
  • Hidden cord clutter and user accessories.
  • Opening under front plate and side legs for cords pass-thru.
  • Product package can be used as compact travel case.
  • Made from aluminum and steel in Portland, Oregon.


Active Airflow Cooling Features
  • Airflow directed and optimized for superior cooling performance.
  • Fan drives airflow onto aluminum enclosure for improved cooling.
  • Finger guard spaced off of fan for increased cooling airflow and reduced noise.
  • Open space above and below fan for increased cooling airflow and reduced noise.
  • Third generation laptop support arm design with 200% more open airflow than 1st generation and 70% more than 2nd generation.
  • External outlet power supply for increased power with reduced internal laptop heat gain.
  • Large 120x120x25mm 12-volt fan for powerful yet quiet cooling.
  • High-speed for max cooling and low-speed for quiet cooling.
  • Aluminum front facing pushbutton switch with high- and low-speed LEDs for effective and simple to operate dual-speed control.
  • Snap-on air deflector to direct airflow and for users sensitive to cold air movement.


Passive Airflow Cooling Features
  • Optimized passive airflow cooling so fan can be turned off for silent operation.
  • Angled laptop with raised back edge helps rising hot air through exhaust vents.
  • Angled laptop with lowered front edge helps pull cool air through laptop intake vents.
  • Open space below and around laptop for improved cooling air circulation.
  • Angled up and out support arms direct airflow for improved cooling.
  • Large air channel cutouts in the support arms for improved cooling.
  • Third generation laptop support arm design with 200% more open airflow that 1st generation and 70% more than 2nd generation.


SVALT Cooling Stand model SRx workstation diagram Workstation Productivity Features
  • Non-slip feet pads and heavy weight for increased stability.
  • MacBook Pro 16-inch laptop screen raised approximately 8.3 inches for improved ergonomics.
  • Raised screen for improved external display alignment.
  • Heavy steel and aluminum construction for rigid no-bounce laptop typing.
  • Solid front panel for hiding cable clutter.
  • Solid front panel for hiding user accessories, drives and docking stations.
  • Opening under front plate and side legs for cords pass-thru and hidden clutter.
  • Removable straps for hiding cables on support arms and quick laptop setup.


SVALT Cooling Cooling Stand model SRx laptop compatibility diagram Device Compatibility Features
  • Two position non-slip pads better support a wider range of laptops from ultra-compact to ultra-large gaming laptops.
  • Cooling optimized for current generation Mac laptops, with universal Mac and PC laptop cooling.
  • Solid, rigid and stable structure for universal laptop support, including large PC gaming laptops.


SVALT Cooling Stand model SRx exploded components diagram Right-to-Repair Modularity Features
  • Bolt-on modular components for multiple product model configurations.
  • Modular bolt/snap assembly for customer servicing, replacement, exchange or upgrade.
  • Bolt-on speed control circuit board for servicing, replacement, exchange or upgrade.
  • Bolt-on fan with standard 3/4-pin fan connection for customer servicing, replacement, exchange or upgrade with nearly any 120x120x25mm fan.
  • Product ships with all of the tools required for disassembly.
  • Packaging system works with all Cooling Stand SRx models.
  • Product package can be used as compact travel case.


Material and Component Quality Features
  • Extra thick 0.312 inch 6061 aluminum front plate for extra strength and durability.
  • Anodized aluminum finish for matching Mac laptop finishes.
  • Black powder coated steel laptop support arms, support legs, and cooling unit frame for extra strength and durability.
  • Metal construction for long life span and end-of-life recyclability.
  • High-quality fans with long life performance.
  • High-quality components over-specced for increased performance and life.
  • Minimal use of plastic for reduced environmental impact.
  • Biodegradable package cushioning for reduced impact.


Company Features
  • Designed and crafted with care in and around Portland, OR, USA (includes foreign electronic components).
  • Design driven by a passion to make best-in-class products.
  • Innovative design with patents issued and/or pending.
  • Support for anyone with a SVALT product.


Additional Mac Mini Support Features
  • See SRxM product page for associated features with Mac Mini Supports and accessories.


Featured Products

1 8

Product Selection Guides

Product User Guides