COMPARE: Models-SRx-Sx

Compare SRx vs Sx

SVALT Cooling Stand SRx vs Sx products Design
  • SRx: Rectilinear styling with a multi-component base support made from an anodized aluminum flat front mounting plate and separate steel support legs.
  • Sx: Angular styling with a single component base support made from formed anodized aluminum.
Leveling
  • SRx: The two upper support arms and two lower support legs have slightly oversized mounting holes to allow for small height adjustments, and the product ships with one set of levels pads for additional small height adjustments to both the upper arms and lower legs.
  • Sx: The two upper support arms have slightly oversized mounting holes to allow for small height adjustments, and the product ships with one set of upper arm levels pads for additional small height adjustments. The solid aluminum support base has four threaded holes at the four corners of the lower horizontal panel. The product ships with four leveling fasteners with non-slip pads that can be installed fully recessed within the aluminum base’s thickness and then each can be independently deployed to level the base for small to larger height adjustments as required. The base’s threaded holes can also be used to bolt the Stand to a desk or mobile workstation.
Hidden Cable Clutter
  • SRx: Cables can be fed through the gap under the anodized aluminum front mounting plate, as well as the sides through the gap under the support legs. The cables are then hidden from view and routed to the laptop along the inside of the upper support arms.
  • Sx: Cables can be fed from the sides, then hidden from view and routed to the laptop along the inside of the upper support arms.
Packaging
  • SRx: The flat anodized aluminum mounting plate with separate support legs allows the individual components to fit within more compact and slimmer product packaging with locking lid for easier transportation.
  • Sx: The heavier and larger solid anodized aluminum support base ships with the cooling system pre-installed and with the base bolted onto the product packaging. This allows the inner product packaging to also act as the outer shipping packaging, which reduces shipment size and shipping waste.
Weight
  • SRx: 3.7 pounds
  • Sx: 5.4 pounds
Cost
  • SRx: $299 with 3rd generation laptop support arms.
  • Sx: $279 with 2nd generation laptop support arms, and $299 with 3rd generation laptop support arms.
Availability
  • SRx: The SRx is sold out and discontinue, so see the Sx, or the new MxS-hi and MxS-loCooling Stand models.
  • Sx: The Sx is in-stock and available.