SRx SPECIFICATIONS


Cooling System Specifications
  • G12 Fan: Noctua NF-S12B redux-1200 120x120x25mm 12-volt case fan with 7 gray blades and a long life ball bearing. The low-speed cooling mode (lower LED) runs at approximately 900 RPM and produces up to 45 CFM airflow and approximately 12 dB(A) noise level. The high-speed cooling mode (upper LED) runs at approximately 1200 RPM and produces up to 59 CFM airflow and approximately 18 dB(A) noise level.
  • G07 Fan: Noctua NF-S12B redux-700 120x120x25mm 12-volt case fan with 7 gray blades and a long life ball bearing. The low-speed cooling mode (lower LED) runs at approximately 500 RPM and produces up to 28 CFM airflow and approximately 5 dB(A) noise level. The high-speed cooling mode (upper LED) runs at approximately 700 RPM and produces up to 34 CFM airflow and approximately 7 dB(A) noise level.
  • Modular Cooling System: Bolted connection for easy upgrade, exchange, servicing or cleaning. Cooling systems are available to purchase separately.
  • Modular Fan: Standard 2/3/4-pin fan connector for easy upgrade, exchange, servicing or cleaning with virtually any 120x120x25mm fan. User/customer supplied replacement fans must meet the following specifications: 1) 120x120x25mm +/-1mm in thickness, 2) 2-pin, 3-pin or 4-pin compact fan connector, 3) 12V, 4) 0.42A max, and 5) low-speed resistor 68 Ohms 3 Watt resistor compatibility.
  • Replacement Fans: Fans are available through accessories.
  • Air Deflector: User can choose to install the optional air deflector to provide an increase in directed cooling performance and to prevent air from hitting their hands.
  • Setup: See Product Setup page for product setup, operation and additional user guide resources.
  • Right-to-Repair: See Right-to-Repair page for product assembly/disassembly and component installation/removal.


Power Supply Specifications
  • A North American power supply is included with USA, Canada, Mexico or Japan, while an international power supply is included with other locations.
  • North America Power Supply Specs: 100-240V AC input and 12V output power supply with a fixed Type A (USA, Canada, Mexico, Japan) plug.
  • International Power Supply Specs: 100-240V AC input and 12V output power supply with Type A (USA, Canada, Mexico, Japan), Type C (Europe, South America, Asia), Type G (United Kingdom, Ireland), and Type I (Australia, New Zealand, China) interchangeable plugs.
  • Replacement: SVALT products may only be used with the certified and marked LPS (Limited Power Supply) power supply. A replacement power supply is available through accessory.


Device Compatibility Specifications
  • Compatible Apple / Mac Laptops: All Mac laptops, as well as other devices per the compatibility criteria listed below.
  • Compatible PC Laptops: Oversized gaming to small PC laptops per the compatibility criterial listed below.
  • Compatibility Criteria for Types: Works with laptops operated in open-screen or closed-screen clamshell mode.
  • Compatibility Criteria for Fit: Works with all Mac and PC laptops that are at least 9.4 inches wide (side-to-side) and 6.8 inches deep (front-to-back). We are not aware of any laptop made that is too large or too heavy for the Cooling Stand’s substantial heavy bolt and oversized metal support structure.
  • Compatibility Criteria for Cooling: Works with laptop built-in cooling system designs and layouts of which we are aware. Cooling performance improves with devices that have the following attributes, where more attributes result in more cooling: 1) Metal enclosures / chassis to absorb heat and then transfer it to cooling airflow. 2) Laptop used without customer installed surface covering that traps heat, reducing the ability to transfer heat to surroundings. 3) Larger laptop size for increased surface area cooling. 4) Hot air exhaust vents located along the back screen hinge edge to exhaust rising hot air. 5) Cool air intake vents located on the bottom underside surface, along the front edge, or along the front portion of the side edges to pull in fresh cool air.
  • Compatibility Criteria for User Accessories: The Cooling Stand’s solid front panel blocks cooling fan airflow and noise, as well as hides cord clutter and user accessories. When placing user accessory items that generate heat, then some portion of that heat will transfer to the laptop through line-of-site proximity heat radiation, rising hot air currents, and/or fan driven air movement. To lessen heat transfer to the laptop, or when maximum laptop cooling is desired, then avoid placing items that generate heat close to the laptop. When placing items under the cooling fan, then note the maximum available open space under the fan is 2.525 inches in height. Placing large and/or tall items directly under the fan will reduce fan efficiency, lower airflow and/or increased noise. To lessen these effects, do not place tall user accessories directly under the fan intake, and for maximum cooling efficiency, do not place anything under or around the fan.
  • Recommended Laptop Compatibility and Additional Info: See Laptops page to learn about Apple laptop’s built-in cooling systems and SVALT model recommendations.


Dimensional Specifications
  • Product Side to Side: 9.5 inches.
  • Product Front to Back: 8.7 inches.
  • Product Top to Bottom: 7.8 inches.
  • Product Weight: 3.7 lbs.
  • Shipping Weight: 6.2 lbs.


Content Specifications
  • Contents
    • 1 x Support Mounting Plate: anodized aluminum modular system component onto which other components mount, ships uninstalled in foam pocket.
    • 1 x Support Plate #10 hex key: tool for installing modular system components, ships uninstalled in accessories box.
    • 2 x Laptop Support Arms: steel 3rd generation laptop support arms, ships uninstalled in foam pocket.
    • 4 x Laptop Support Arm cable straps: user installed Velcro straps, ships uninstalled in accessories box.
    • 4 x Laptop Support Arm #10 mounting fasteners: fasteners to mount Support Arms onto Support Plate, ships uninstalled in accessories box.
    • 2 x Support Legs: steel support leg modular system component, ships uninstalled in foam pocket.
    • 4 x Support Leg #10 mounting fasteners: fasteners to mount Support Legs onto Support Plate, ships uninstalled in accessories box.
    • 6 x Support Arm and Leg leveling pads: optional user installed non-slip 1/32” thick pads to level arm and leg contact pad locations, ships uninstalled in accessories box.
    • 1 x Cooling Unit: active airflow cooling modular system component, ships uninstalled in foam pocket.
    • 1 x Cooling Unit air deflector: user installed accessory, ships uninstalled in accessories box.
    • 1 x Cooling Unit power supply: see power supply notes below, ships uninstalled in accessories box.
    • 2 x Cooling Unit #10 mounting fasteners: fasteners to mount Cooling Unit to Support Plate, ships uninstalled in accessories box.
    • 1 x Cooling Unit #8 hex key: tool for servicing and accessing Cooling Unit internal components, ships uninstalled in accessories box.
    • 1 x Reusable accessory box: holds accessories.
    • 1 x Reusable product packaging: modular product box works with all Cooling Stand SR series models and can be used as a compact travel case.
  • Additional/Replacement Contents for Optional Mac Mini/Studio Supports
    • 2 x Cooling Unit Mac Mini / Studio supports: Mac Mini / Studio modular system component, ships installed.
    • 4 x Cooling Unit Mac Studio retention pads: Optional user installed add-on pads can be installed to lock a Mac Studio in place, ships uninstalled in accessories box.
    • 4 x Cooling Unit Mac Mini retention pads: Optional user installed add-on pads can be installed to lock a Mac Mini in place with the bottom cover removed, ships uninstalled in accessories box.
    • 1 x Cooling Unit Mac Mini / Studio dust filter: Mac Mini / Studio modular system component, ships uninstalled in accessories box.
    • 1 x Cooling Unit Mac Mini / Studio dust filter frame: Mac Mini / Studio modular system component, ships installed.
    • 4 x Cooling Unit Mac Mini / Studio #8 thumb nuts: Mac Mini / Studio modular system component, ships installed.
    • 4 x Cooling Unit #8 long fan fasteners: Mac Mini / Studio modular system component, ships installed.
    • 1 x iFixit Mac Mini bottom case opener: tool for users who wish to remover bottom cover on 2018+ Mac Minis, ships uninstalled in accessories box.
  • Note: Assembly required. Follow packaging labels and see Product Setup page for product setup, operation and additional user guide resources.


SVALT anodized aluminum colors Aluminum Finish Color Specifications
listed from left to right
  • Silver bead blasted matte anodize aluminum finish is similar to Apple Silver.
  • Gray bead blasted matte anodize aluminum finish is similar to Apple Space Gray.
  • Dark Gray bead blasted matte anodize aluminum finish is similar to Apple Space Black.
  • Black bead blasted matte anodize aluminum finish is a full and deep black.
  • Notes
    • Anodized parts are pre-finished by hand and then anodized by hand in small batches. The anodize color may vary slightly between parts.
    • Anodized part’s bottom and/or back surfaces are considered non-cosmetic finish.
    • Satin silver and glossy black anodized finishes are brighter than matte anodize.
    • Cooling Stand arm, leg and cooler cover parts are made from steel and have a matte black powder coat finish. The parts have non-cosmetic conditions around the through holes used for mounting holes.


SVALT fans and colors G07, G12, G09, G17 Fan Model Color Specifications
listed from left to right
  • G07 and G12 120x120x25mm Noctua fan with light gray frame and dark gray blades.
  • G09 and G17 120x120x25mm Noctua fan with light gray frame and dark gray blades.


Additional Mac Mini Support Specifications
  • See SRxM product page for associated specifications with Mac Mini Supports and accessories.