MxW Specs: Contents

CONTENTS

Mx modular system component map view, rendering.

• 1 x SVALT Thermally Conductive Heatsink for the Mx Modular Heatsink Cooling System. Available in raw aluminum or with a space black anodize finish. Four side support mounting pads installed on heatsink.
  
  
• 2 x SVALT Wood Side Supports (Dock, Stand High or Stand Low Supports) for the Mx Modular Heatsink Cooling System. Bamboo plywood material. Non-slip pads installed on each side support. Note orders with multiple side supports include additional sets of side supports per order configuration.
  
  
• 4 x SVALT Leveling Pads for the Mx Wood Side Supports.
  
  
• 9 x #10-32 1 or 1-1/4 inch long flat head hex drive fasteners with a stainless steel material for raw aluminum heatsink or a black finish for anodized heatsinks. Fasteners are used for attaching side supports to heatsink (8 needed for installation plus 1 extra).
  
  
• 3 x #10-32 3/4-inch long black flat head hex drive fasteners for cable management assembly with wood side supports (1-2 needed for installation plus 1 extra).
  
  
• 3 x #10 black washers for cable management assembly (1-2 needed for installation plus 1 extra).
  
  
• 3 x #10-32 black nuts for cable management assembly (1-2 needed for installation plus 1 extra).
  
  
• 3 x 3-inch long and 1/2-inch wide hook and loop strips with hole in center for cable management assembly (1-2 needed for installation plus 1 extra).
  
  
• 1 x 1/8-inch ball-end hex wrench/key for attaching side supports to heatsink, and right-to-repair disassembly.
  
  
• 1 x Cloth for cleaning heatsink and laptop coupling surfaces.
  
  

• 1 x Power on/off switch and adapter with 3/4-pin fan connecter at one end and 2.1m barrel power supply connecter at the other end.
  
  
• 1 x Power supply. Orders for North American include a 100-240V AC input and 12V output power supply with fixed Type A (USA, Canada, Mexico, Japan) plug, while international orders include interchangeable plugs with Type A (USA, Canada, Mexico, Japan), Type C (Europe, South America, Asia), Type G (United Kingdom, Ireland), and Type I (Australia, New Zealand, China).
  
  

• 1 x 140x140x25mm case fan per customer's selected order configuration. Installed onto heatsink.
  
  
• 1 x 140mm black metal fan grill / guards. Installed onto fan and heatsink.
  
  
• 4 x #8-32 1 1/4-inch long black fasteners. Installed onto fan and heatsink.
  
  
• 1 x 5/64-inch ball-end hex wrench/key for attaching fan to heatsink, and right-to-repair disassembly.
  
  

• 2 x SVALT Fx Cooling Fan black anodized aluminum 80mm fan support feet with non-slip pads. Installed on Fx Cooling Fan.
  
  
• 1 x 80x80x25mm case fan per customer's selected order configuration. Installed on Fx Cooling Fan.
  
  
• 2 x 80mm black metal fan grill / guards. Installed on Fx Cooling Fan.
  
  
• 2 x #8-32 1 1/2-inch long black socket cap fasters. Installed on Fx Cooling Fan.
  
  
• 2 x #8-32 x 1 1/4-inch long black fasters. Installed on Fx Cooling Fan.
  
  
• 2 x #8 black nuts. Installed on Fx Cooling Fan.
  
  
• 1 x 9/64-inch hex wrench/key for right-to-repair Fx Cooling Fan disassembly.
  
  

• 1 x Noctua NA-FC1 PWM dial-variable speed-controller.
  
  
• 2 x Noctua fan extension cable.
  
  
• 1 x Noctua fan 3-way splitter cable for dual 140mm and 80mm adjustable-speed configurations.
  
  
• 1 x Noctua fan power supply adapter for optional customer DIY setups.
  
  

• 2 x folded cardboard packaging insert bolted onto each side of heatsink.
  
  
• 2 x flat cardboard packaging insert bolted onto pair of side supports. Note orders with multiple side supports include additional layers of cardboard inserts.
  
  
• 8 x heatsink packaging fasteners.
  
  
• 4 x side supports packaging fasteners. Note orders with multiple side supports use longer fasteners.
  
  
• 4 x side supports packaging nuts.
  
  
• 12 x heatsink and side supports packaging oversized washers.
  
  
• 1 or more x accessories boxes for heatsink, supports, and fan cooling system accessories.
  
  
• 1 or more x layers of hex cardboard for top/bottom layer cushioning and void fill.
  
  
• 1 x cardboard box that serves as both the shipping and product box.
  
  

• Assembly: Some assembly may be required. Follow packaging labels and see Product Setup page for product setup, operation and additional user guide resources.
  
  
• Multiple Fan Cooling Systems: The 140mm and 80mm combined adjustable-speed fan cooling system includes a bundle discount for a single power supply (fixed for North America and multi-plug for other locations), single fan to power connection adapter with on/off switch, single Noctua NA-FC1 PWM dial-variable speed controller, and single set of Noctua cable adapters. Three Noctua fan extension cables are included, and a Noctua fan cable splitter allows both 140mm and 80mm fans to run simultaneously with adjustable speed control.
  
  
• Discounted Support Bundles: A $30 bundle discount is automatically applied to the shopping cart when you add any one of the six Mx products along with any one of the twelve Mx supports from the Mx Components page. This provides customers with the ability to switch supports out for a variety of laptop workstation setups.