MxSW2-hi 8 contents specs

CONTENT SPECIFICATIONS

Contents for All Configurations

1 x SVALT Thermally Conductive Heatsink for the Mx Modular Heatsink Cooling System. Available in raw aluminum or with a deep matte black anodize finish. Four side support mounting pads installed on heatsink.

2 x SVALT Second Generation High Stand Wood Side Supports for the Mx Modular Heatsink Cooling System. A paired set of left and right sides. Black-core fiber, white hardwood or amber bamboo material. Non-slip pads installed on each side support. Note orders with support bundles include multiple sets of side supports.

2 x SVALT Second Generation Low Stand Wood Side Supports for the Mx Modular Heatsink Cooling System, also called Laptop Support Arms. Used in combination with the second generation high supports to build the high stand configuration (MxSW2-hi) or used without the second generation high supports to build the low stand configuration (MxSW2-lo). A paired set of left and right sides. The arms come in two sizes, large and small. Large, small or both arms are included per selected order configuration. Black-core fiber, white hardwood or amber bamboo material. Non-slip pads installed on each side support. Note orders with both arm sizes include two pairs of left and right sides, and orders with support bundles include multiple sets of side supports.

8 x SVALT Replacement Pads for the Mx Wood Side Supports. Four 1/16” thick and four 1/32” thick.

5 x #10-32 1-1/2-inch long flat head hex drive fasteners attaching arm supports through high supports to the front of the heatsink (MxSW2-hi configuration). Configurations with black anodized heatsinks include black fasteners and configurations with raw aluminum heatsinks include stainless steel fasteners. (4 needed for installation plus 1 extra).

5 x #10-32 1-inch long cap head hex drive fasteners for attaching high supports to the back of the heatsink and attaching cable management assembly (MxSW2-hi configuration). Configurations with black anodized heatsinks include black fasteners and raw aluminum heatsinks include stainless steel fasteners. (4 needed for installation plus 1 extra).

5 x #10 washers for #10-32 1-1/2-inch long flat head hex drive fasteners and cable management assembly. Configurations with black anodized heatsinks include black fasteners and configurations with raw aluminum heatsinks include stainless steel fasteners. (1-2 needed for installation plus 1 extra).

3 x 3-inch long and 1/2-inch wide hook and loop strips with hole in center for cable management assembly (1-2 needed for installation plus 1 extra).

1 x 1/8-inch hex wrench/key for attaching side supports to heatsink, and right-to-repair disassembly.

1 x Cloth for cleaning heatsink and laptop coupling surfaces.

Additional Contents for MxSW2-lo Kit

4 x #8-32 1-inch long “tall” knurled thumbscrew with hemisphere non-slip bumper pad that screw into the bottom of the heatsink as taller adjustable-height feet. All four can be installed for a taller heatsink and laptop height with flat laptop support. Alternatively, two taller feet can be installed at the back with two shorter feet at the front to create an inclined laptop support angle. These items are only meant to be used for the low stand configuration (MxSW2-lo).

4 x #8-32 3/8-inch long “short” knurled thumbscrew with hemisphere non-slip bumper pad that screw into the bottom of the heatsink as shorter adjustable-height feet. All four can be installed for a shorter heatsink and laptop height with flat laptop support. Alternatively, two taller feet can be installed at the back with two shorter feet at the front to create an inclined laptop support angle. These items are only meant to be used for the low stand configuration (MxSW2-lo).

4 x #8-32 knurled thumbscrew nuts pre-installed onto the tall adjustable-height feet. The thumb nuts lock the feet in place after a height increase adjustment. These items are only meant to be used for the low stand configuration (MxSW2-lo).

4 x #8-32 nuts for the short adjustable-height feet. Customers can thread the nuts onto the short adjustable-height feet to change the minimum height adjustment and lock the feet in place after a height increase adjustment. They can be added to only the back two feet in order to slightly increase the laptop angle, or can be added to all of the feet to increase the overall height. These items are only meant to be used for the low stand configuration (MxSW2-lo).

5 x #10-32 1-inch long flat head hex drive fasteners for attaching arm supports to the front of the heatsink without the high supports. (4 needed for installation plus 1 extra). These items are only meant to be used for the low stand configuration (MxSW2-lo).

5 x #10-32 3/4 or 5/8-inch black long cap head hex drive fasteners for attaching cable management assembly to the back of the heatsink. (4 needed for installation plus 1 extra). These items are only meant to be used for the low stand configuration (MxSW2-lo).

Additional Contents for All Fan Cooling Systems

1 x Power adapter cable with 3/4-pin fan connecter at one end and 2.1m barrel power supply connecter at the other end.

1 x Power supply. Orders for North American include a 100-240V AC input and 12V output power supply with fixed Type A (USA, Canada, Mexico, Japan) plug, while international orders include interchangeable plugs with Type A (USA, Canada, Mexico, Japan), Type C (Europe, South America, Asia), Type G (United Kingdom, Ireland), and Type I (Australia, New Zealand, China).

Additional Contents for 140mm Fan Cooling Systems

1 x 140x140x25mm case fan per customer's selected order configuration. Installed onto heatsink.

1 x 140mm black metal fan grill / guards. Installed onto fan and heatsink.

4 x #8-32 1 1/4-inch long black fasteners. Installed onto fan and heatsink.

1 x 5/64-inch hex wrench/key for attaching fan to heatsink, and right-to-repair disassembly.

Additional Contents for Adjustable-Speed Fan Cooling Systems

1 x Noctua NA-FC1 PWM dial-variable speed-controller.

1 x Noctua fan extension cable.

1 x Noctua fan 3-way splitter cable for dual 140mm and 80mm adjustable-speed configurations.

1 x Noctua fan power supply adapter for optional customer DIY setups.

Packaging System Contents for All Configurations

2 x SVALT folded cardboard packaging insert bolted onto each side of heatsink.

2 x SVALT flat cardboard packaging insert bolted onto pair of side supports. Note orders with multiple side supports include additional layers of cardboard inserts.

8 x heatsink packaging fasteners.

4 x side supports packaging fasteners. Note orders with multiple side supports use longer fasteners.

4 x side supports packaging nuts.

12 x heatsink and side supports packaging oversized washers.

2 x SVALT accessories boxes for heatsink, supports, and fan cooling system accessories.

1 or more x layers of hex cardboard for top/bottom layer cushioning and void fill.

1 x cardboard box that serves as both the shipping and product box.

Notes

Assembly: Assembly required. Follow packaging labels and see Product Setup page for product setup, operation and additional user guide resources.

Discounted Support Bundles: A bundle discount is automatically applied to the shopping cart when you add any one of the Mx products along with any one of the Mx supports from the Mx Components page. The bundle discount can apply to up to three extra sets of supports. Having one or more extra set of supports provides customers with a variety of laptop workstation setups. Note that the MxSW2-hi includes components for customers to reconfigure as the MxSw2-lo.