MxDW2 8 contents specs

CONTENTS SPECIFICATIONS

Contents for All Configurations

1 x SVALT Thermally Conductive Heatsink for the Mx Modular Heatsink Cooling System. Available in raw aluminum or with a deep matte black anodize finish. Four side support mounting pads installed on heatsink.

2 x SVALT Second Generation Dock Wood Side Supports for the Mx Modular Heatsink Cooling System. A paired set of left and right sides. Black-core fiber, white hardwood or amber bamboo material. Non-slip pads installed on each side support. Note orders with support bundles include multiple sets of side supports.

8 x SVALT Leveling Pads and/or Replacement Pads for the Mx Wood Side Supports. Four 1/16” thick and four 1/32” thick.

9 x #10-32 1-inch long flat head hex drive fasteners for attaching side supports to heatsink. Configurations with black anodized heatsinks include black fasteners and configurations with raw aluminum heatsinks include stainless steel fasteners. (8 needed for installation plus 1 extra).

3 x #10-32 3/4-inch long black flat head hex drive fasteners for cable management assembly with wood side supports (1-2 needed for installation plus 1 extra).

3 x #10 black washers for cable management assembly (1-2 needed for installation plus 1 extra).

3 x #10-32 black nuts for cable management assembly (1-2 needed for installation plus 1 extra).

3 x 3-inch long and 1/2-inch wide hook and loop strips with hole in center for cable management assembly (1-2 needed for installation plus 1 extra).

1 x 1/8-inch hex wrench/key for attaching side supports to heatsink, and right-to-repair disassembly.

1 x Cloth for cleaning heatsink and laptop coupling surfaces.

Additional Contents for All Fan Cooling Systems

1 x Power adapter cable with 3/4-pin fan connecter at one end and 2.1m barrel power supply connecter at the other end. On/off switch built into the adapter.

1 x Power supply. Orders for North American include a 100-240V AC input and 12V output power supply with fixed Type A (USA, Canada, Mexico, Japan) plug, while international orders include interchangeable plugs with Type A (USA, Canada, Mexico, Japan), Type C (Europe, South America, Asia), Type G (United Kingdom, Ireland), and Type I (Australia, New Zealand, China).

Additional Contents for 140mm Fan Cooling Systems

1 x 140x140x25mm case fan per customer's selected order configuration. Installed onto heatsink.

1 x 140mm black metal fan grill / guards. Installed onto fan and heatsink.

4 x #8-32 1 1/4-inch long black fasteners. Installed onto fan and heatsink.

1 x 5/64-inch hex wrench/key for attaching fan to heatsink, and right-to-repair disassembly.

Additional Contents for 80mm Fx Fan Cooling Systems

2 x SVALT Fx Cooling Fan black anodized aluminum 80mm fan support feet with non-slip pads. Installed on Fx Cooling Fan.

1 x 80x80x25mm case fan per customer's selected order configuration. Installed on Fx Cooling Fan.

2 x 80mm black metal fan grill / guards. Installed on Fx Cooling Fan.

2 x #8-32 1 1/2-inch long black socket cap fasters. Installed on Fx Cooling Fan.

2 x #8-32 x 1 1/4-inch long black fasters. Installed on Fx Cooling Fan.

2 x #8 black nuts. Installed on Fx Cooling Fan.

1 x 9/64-inch hex wrench/key for right-to-repair Fx Cooling Fan disassembly.

Additional Contents for Adjustable-Speed Fan Cooling Systems

1 x Noctua NA-FC1 PWM dial-variable speed-controller.

1 x Noctua fan extension cable.

1 x Noctua fan 3-way splitter cable for dual 140mm and 80mm adjustable-speed configurations.

1 x Noctua fan power supply adapter for optional customer DIY setups.

Packaging System Contents for All Configurations

2 x SVALT folded cardboard packaging insert bolted onto each side of heatsink.

2 x SVALT flat cardboard packaging insert bolted onto pair of side supports. Note orders with multiple side supports include additional layers of cardboard inserts.

8 x heatsink packaging fasteners.

4 x side supports packaging fasteners. Note orders with multiple side supports use longer fasteners.

4 x side supports packaging nuts.

12 x heatsink and side supports packaging oversized washers.

2 x SVALT accessories boxes for heatsink, supports, and fan cooling system accessories.

1 or more x layers of hex cardboard for top/bottom layer cushioning and void fill.

1 x cardboard box that serves as both the shipping and product box.

Notes

Assembly: Assembly required. Follow packaging labels and see Product Setup page for product setup, operation and additional user guide resources.

Multiple Fan Cooling Systems: The 140mm and 80mm combined adjustable-speed fan cooling system includes a bundle discount for a single power supply (fixed for North America and multi-plug for other locations), single fan to power connection adapter, single Noctua NA-FC1 PWM dial-variable speed controller, and single set of Noctua cable adapters. Multiple Noctua fan extension cables are included, and a Noctua fan cable splitter allows both 140mm and 80mm fans to run simultaneously with adjustable speed control.

Discounted Support Bundles: A bundle discount is automatically applied to the shopping cart when you add any one of the Mx products along with any one of the Mx supports from the Mx Components page. The bundle discount can apply to up to three extra sets of supports. Having one or more extra set of supports provides customers with a variety of laptop workstation setups.