MxDW2 11 compatibility specs

COMPATIBILITY SPECIFICATIONS

Dock Support Compatibility
The Mx dock supports use a leaning laptop position instead of a straight vertical position to maintain contact pressure on the heatsink’s thermally conductive coupling plate for improved heat transfer, and for easier clamshell mode setup. The leaning position accommodates a wider range of laptop models and sizes, as well as tablets and other devices.

Mx Product Line Compatibility
All Mx models within the Mx modular heatsink cooling system use a universal support design approach to offer compatibility with a wider range of devices, including all modern Apple laptops, many PC laptops and other devices. The following is a list of compatible devices. The list includes recommended heatsink mounting position when used with first generation high/low stand supports, and recommended laptop support arm size when used with second generation high/low stand supports.

Apple MacBook Pro

• 2021+ 16-inch (Apple Silicon): position 1 / large arm.
• 2021+ 14-inch (Apple Silicon): position 3 / small arm.
• 2023+ 14-inch (Apple Silicon): position 3 / small arm.
• 2020-2023 13-inch Touch Bar (Apple Silicon): position 4 / small arm.
• 2019-2020 16-inch Touch Bar (Intel): position 2 / large arm.
• 2016-2019 15-inch Touch Bar (Intel): position 3 / large arm .
• 2016-2020 13-inch Touch Bar (Intel): position 4 / small arm.
• 2016-2019 13-inch non-Touch Bar (Intel): position 4 / small arm.
• 2012-2018 15-inch Retina (Intel): position 2 / large arm.
• 2013-2017 13-inch Retina (Intel): position 4 / small arm.
• 2012 13-inch Retina (Intel): position 4 / small arm.

Apple MacBook Air

• 2023+ 15-inch (Apple Silicon): position 2 / large arm.
• 2022+ 13-inch (Apple Silicon): position 4 / small arm.
• 2020-2023 13-inch Retina (Apple Silicon): position 4 / small arm.
• 2018-2020 13-inch Retina (Intel): position 4 / small arm.
• 2010-2019 13-inch (Intel): position 4 / small arm.

Apple MacBook Neo

• 2026+ 13-inch (Apple Silicon): position 4 / small arm.

Apple MacBook

• 2015-2018 12-inch Retina (Intel): position 4 / small arm.

Other Devices

• The Mx is compatible with many other laptops, tablets and devices per the Compatibility Criteria below.

Compatibility Criteria
The Mx is a fully modular system built around the core heatsink component. The top of heatsink has an extra large coupling plate for direct metal-to-metal coupling with a device’s metal enclosure/chassis to thermally conduct heat from the device and into the heatsink. For device compatibility with the Mx modular heatsink cooling system, all of the following compatibility criteria must be met:

• Metal Coupling: For proper heatsink coupling and maximum thermally conductive heat transfer, the back/bottom of the device should have a metal enclosure/chassis without a protective cover/case installed over or on top of the metal surface.
• Flat Coupling: For proper heatsink coupling and maximum thermally conductive heat transfer, the back/bottom of the device should have a flat metal surface free of pads, bumps and protrusions within the heatsink’s coupling area.
• Coupling Area: For proper heatsink coupling and maximum thermally conductive heat transfer, the back/bottom of the device should have flat metal surface that is at least 6.750 inches front-to-back and 5.950 inches side-to-side. A smaller area can work with a device that is smaller than the heatsink and meets other compatibility criteria.
• Air Vents: If the device has a built-in air cooling system, then the device’s vent locations and their direction of airflow needs to be considered, such as the following: 1) The device’s vents should not be covered by the heatsink’s coupling area. 2) The device’s hot exhaust vents should not blow directly onto the heatsink.
• Fit w/ Dock Supports: The Dock Supports position the heatsink above the device’s bottom edge by approximately 0.430 inches.
• Fit w/ Stand Supports: The second generation High/Low Stand Supports use laptop support arms available in two sizes, large and small. The large arms position the front edge of heatsink approximately 2.5 inches from the device’s front edge. The small arms position the front edge of heatsink approximately 1.4 inches from the device’s front edge.

Learn More
See Laptops page to learn more.