Mx Components: Alum Supports Contents

Dock / Stand Aluminum Supports Contents

• 2 x SVALT Aluminum Side Supports (Dock, High Stand or Low Stand Supports) for the Mx Modular Heatsink Cooling System.
  
  
• 2 x SVALT #10-32 Adjust Height Feet / Leveling Fasteners for the Mx Aluminum Side Supports. Matching anodized aluminum and with non-slip pad installed on each foot/fastener. Raw aluminum supports include fasteners with clear anodize.
  
  
• 9 x #10-32 1-inch long black flat head hex drive fasteners for attaching side supports to heatsink. Raw aluminum supports include stainless steel fasteners. (8 needed for installation plus 1 extra).
  
  
• 3 x #10-32 1/2-inch long black flat head hex drive fasteners for cable management assembly with aluminum supports (1-2 needed for installation plus 1 extra).
  
  
• 3 x #10 black washers for cable management assembly (1-2 needed for installation plus 1 extra).
  
  
• 3 x #10-32 black nuts for cable management assembly (1-2 needed for installation plus 1 extra).
  
  
• 3 x 3-inch long and 1/2-inch wide hook and loop strips with hole in center for cable management assembly (1-2 needed for installation plus 1 extra).
  
  

• 2 x flat cardboard packaging insert bolted onto pair of side supports. Note orders with multiple side supports include additional layers of cardboard inserts.
  
  
• 4 x side supports packaging fasteners. Note orders with multiple side supports use longer fasteners.
  
  
• 4 x side supports packaging nuts.
  
  
• 8 x side supports packaging oversized washers.
  
  
• 1 or more x layers of hex cardboard for top/bottom layer cushioning and void fill.
  
  
• 1 x cardboard box that serves as both the shipping and product box.
  
  

• Assembly: Some assembly may be required. Follow packaging labels and see Product Setup page for product setup, operation and additional user guide resources.