Mx Components: Misc

Mx Misc Components

Accessory Components
  • v2.1/v2.0 arms for MxSW2-hi/lo (arms only no hardware): 1 pair of left and right arms with non-slip laptop pads installed. These are for existing MxSW2-hi/lo customers that want different sized arms for a different sized laptop.

  • v2.1/v2.0 tall adj ht ft for MxSW2-lo: 4 x threaded #8-32 tall feet with round pads and special finger tightening nuts for leveling heatsink and adjustable laptop angle. These can be combined with the short feet at the front for a steeper inclined laptop position.

  • v2.1/v2.0 short adj ht ft for MxSW2-lo: 4 x threaded #8-32 short feet with round pads and nuts for leveling heatsink and adjustable laptop angle. These can be combined with the tall feet at the back for a steeper inclined laptop position.

  • v2.1/v2.0/v1.0 replacement pads and leveling shims for all wood supports: 4 x 1/32” thick and 4 x 1/16” thick pads to help level wood supports on uneven surfaces. These are also the pads that are used elsewhere on the supports, and so can be used to replace those.

  • v1.0 adj ht ft space black for all alum supports: 2 x SVALT #10-32 feet with pads for leveling product. Available with space black, space gray and silver anodized aluminum finish.

  • v2.1/v2.0/v1.0 cable straps for all supports: 3 x 3-inch long and 1/2-inch wide hook and loop strips with hole in center for cable management assembly (1-2 needed for installation plus 1 extra).

Notes
  • Replacement: Mx products and Mx Conversion Kits include cable straps and hardware per the product page features and specs. These items are offered here as a replacement or as an extra set.

  • Assembly: Some assembly may be required. Follow packaging labels and see Product Setup page for product setup, operation and additional user guide resources.